Waterproofing Materials

Product Details:

Formulated with select elastomeric and resilient acrylic polymers and reinforcing polyester fibers, Damp Proof Advanced provides superior whiteness & unmatched waterproofing to Terraces & Exterior walls.

WATERPROOFING WARRANTY

8 years waterproofing warranty on terraces.

SURFACE HEAT REDUCTION

High sheen, brilliant white colour and thick coat results in temperature reduction upto 10 degrees celsius.

CRACK BRIDGING

Unmatched crack bridging ability due to elastomeric properties.

SUPERIOR TECHNOLOGY

Had advanced superior technology.

Additional Information:

• Production Capacity: 100

Product Details:

Roff Rainbow Tile Mate Epoxy Grout is a waterproof, crack-free, stain-free epoxy tile joint filler. This low VOC epoxy tile joint filler can be used to fill grout between ceramic, porcelain, vitrified tiles, natural stones, glass mosaics, and other surfaces. Our epoxy tile joint filler is perfect for grouting surfaces such as bathrooms, kitchens, living rooms, swimming pools, and commercial areas since it can be used in both dry and wet regions. This epoxy-based waterproof tile joint filler has high abrasion, impact, and shock resistance. Other than this, this product can also be used as an epoxy adhesive for tiles and stone fixing.

Packaging Units- 1 / 5 / 20 KG

Packaging Type- Resin & Hardner

Colours- 25 Shades

Additional Information:

• Production Capacity: 100
• Packaging Details: 2 pack epoxy grout

Product Details:

• 100% Silane
• Water soluble nanotechnology
• Thermal and UV stability,
• Life: 20+ years
• Penetrative in very fine pores and cracks
• Reactive, non leachable

Product Details:

Water infiltration causes seepage, leading to cracking of cement / plaster / concrete surfaces, efflorescence, rebar corrosion and fungal growth.

Most of the seepage control and water seepage repair chemicals have failed because they interact with the surfaces only from the outside by forming a protective layer. The best and most cost effective seepage solution is treating surfaces and micro-cracks and making the structure waterproof, with deep penetration. The water soluble ability of Zydex technology enables the treatment of surfaces at micro and nano levels through a chemical reaction. These micro and nano level reactions ensure that the seepage control is achieved with tremendous success.

• zycosil penetrative waterproofing
• nano technology based chemicals
• leaves no residue on surface
• Structural waterproofing 
• Doesnt form any layer on surface
• Can be used for exposed concrete and bricks
• Bathroom and terrace waterproofing

 

• 100% Silane
• Water-soluble nanotechnology
• Thermal and UV stability
• Life: 20+ years
• Penetrative in very fine pores and cracks
• Reactive & non-leachable

ZycoSil+ is a reactive organosilane based water proofing agent that seals upto nano-pore level. It has an ability to penetrate upto 2 mm deep inside the substrate and becomes a permanent integral part of the structure. It reacts and converts the hydrophilic chemical groups of the substrate into hyrdrophobic groups. ZycoSil+ is water dilutable, safe, sprayable and easy to apply. ZycoSil+ is nonleachable, UV resistant, breathable and does not present peel-off issues unlike conventional polymer coatings.

Zycosil+ penetrates up to approximately 2 mm into the substrate and converts the siliceous surface rich with hydrophilic silanol groups to hydrophobic alkyl siloxane groups as per the reaction below: Complete drying is critical to complete the reaction and achieve water resistance. Surface tension of the hydrophobic surface created by Zycosil+ will ensure that water remains on the surface & does not enter into the nano pores of cementitious surface due to surface tension effects. -OH groups make sur face very hydrophilic (water loving): High water permeability leads to water ingress in the building through seepage and deterioration of the plaster / concrete substrate. Siliceous OH OH OH OH OH OH OH Surface Molecular level reaction (hydrophobic groups): ZycoSil+ reacts upon contact with the surface and creates a permanently water repellent layer on its surface. The surface is subsequently rendered impermeable to water ingress. Treated Siliceous Surface 

Product Details:

• Roff New Construction Adhesive (NCA)
• Roff New Construction Tile Adhesive (NCA) is a polymer-modified thin-set, cement-based tile adhesive. This cement-based tile adhesive is specially formulated to fix and install diverse types of tiles such as ceramic, vitrified, terracotta, brick, and quarry tiles. Ideal for both vertical and horizontal surfaces on the cementitious substrate for internal application. Roff New Construction Tile Adhesive T01 is one of the most economically priced adhesives in the market with superior quality results.

• Packaging Units- 20 / 30 KG

  Packaging Type- Powder

  Colours- Grey

Additional Information:

• Production Capacity: 100
• Delivery Time: 1 DAY
• Packaging Details: 30 kg bag

Product Details:

High performance elastomeric cementitiouswaterproof coatingUsesBrushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack byacid gases, chloride ions, oxygen & water. Brushbond RFXis suitable for all types of structures including those in coastalenvironments.

Additional Information:

• Production Capacity: 100
• Delivery Time: 1
• Packaging Details: bag

Product Details:

• Nanotechnology based
• Penetrative waterproofing
• Excellent features for terrace and bathroom

Product Details:

• Fosroc Brushbond
• Two pack
• interior and exterior
• BEST for water retention structures

Product Details:

• Zydex Zycosil max is a next generation organosilane reactive waterproofing chemical.
• Applicable for all exposed surfaces
• Reactive & permanent
• Breathable & UV resistant
• Penetrates upto 4 mm
• Suitable for Horizontal & Vertical surfaces
• Protects against Algae and fungal growth

Additional Information:

• Production Capacity: 50
• Delivery Time: 1
• Packaging Details: 1 and 5 litre

Product Details:

• Two component
• Epoxy resin based
• water thinnable
• Undercoat and interior waterproofer
• Excellent resistance to positive water pressure
• Eco friendly and non toxic

Product Details:

High strength epoxy bonding agentfor new to old concrete and primer forrepair mortars to concrete substrates

For bonding fresh wet cementitious materials to existingcementitious surfaces. For use on horizontal or vertical surfaceswhere mortar or concrete can be supported by formwork. Thelong ‘open’ life makes it suitable for use with formwork orwhere additional steel reinforcement has to be fitted. Theproduct is ideal for roads, bridges, pavements, loading baysand factories, and for bonded or granolithic floor toppings.Nitobond EP is equally suited to internal and externalapplications.Nitobond EP may also be used as part of a repair systemwhere a substrate/repair barrier is required or where thesubstrate is likely to remain permanently damp or wet.

Advantages High strength adhesion - exceeds that of the tensilestrength of the host concrete Exhibits high mechanical strength Can be applied on to dry or SSD damp substrates Solvent free - can be used in enclosed locations

Product Details:

High performance elastomeric cementitiouswaterproof coatingUsesBrushbond RFX is an high performance elastomeric cementitiouscoating used for waterproofi ng and to protect atmosphericallyexposed reinforced concrete structures from attack byacid gases, chloride ions, oxygen & water. Brushbond RFXis suitable for all types of structures including those in coastalenvironments.

Ex cel le nt b ar r ie r to carbo n dioxide, chlor ideand sulphate ions.Allows water vapour to escape from the structure.Waterproof-suitable for water retaining structures.High resistance to the effect of long-term weathering,durable in all climate conditions including UV attack.Non toxic - ideal for potable water tanks.Flexible, with thermal expansion similar to concrete.Excellent bond to concrete and masonry.Good crack accommodation capacity.Minimum surface preparation needed and low labourcosts.

Additional Information:

• Delivery Time: 1
• Packaging Details: bag

Product Details:

Solar radiant, heat resistant, thermo insulative, waterproofing, acrylic surface coating. High standard terrace heat reduction coating.

Product Details:

Heat reflective coatings for terrace and other open concrete structures.
Application of this material reduces the surface temperature considerably.

Product Details:

ZycoPrime is an acrylic co-polymer emulsion supplied as a ready to use bonding agent with superior wet adhesion and universal compatibility. It is also a versatile latex that can be used as a cement modifier for spalled concrete slabs, overhangs, beams, columns and floors. It is also used as a bonding primer and porosity filler with ZycoSil+ during waterproofing applications.

DESCRIPTION:

ZycoPrime+ is an Acylic co-polymer emulsion, supplied as a ready to use bonding agent in liquid consistency. It is a versatile product and can be used as a cement modifier for repair of spalled concrete - slabs, balconies, beams, columns, floors & waterproofing of toilets, bathrooms and terraces.

FEATURES & BENEFITS

• Multipurpose, UV stable & Economical
• When used in concrete / plaster, it prevents cracking
• It reduces drying and shrinkage cracks
• Reduces permeability of water
• Improves workability of concrete / plaster
• Bonds strongly with concrete, plasters, cementitious surfaces
• Reduces viscosity of cement-injection grout and tile adhesives for better fluidity & bonding

APPLICATION AREAS

• Waterproofing Membrane : Roof terraces, sunken portion of toilets & bathrooms, chhajas, balcony, etc.
• Concrete Repairs : Spalled concrete of slabs, chhajas, beams, columns, parapet, floor, etc.
• Waterproofing &/or Bonding Primer : Walls & slabs

COVERAGE

• Vertical Surfaces (Concrete, Brick & Stone) : Approx. 60-80m² (600-800 ft²) per 2 litres of ZycoPrime+ diluted in a 21 litre solution of 1:20 ZycoSil+ solution in water.
• Horizontal Concrete Surfaces : Approx. 24-40m² (250-400 ft²) per 2 litre of ZycoPrime+ diluted in a 21 litre solution of 1:20 ZycoSil+ solution in water.
• The coverage may vary depending upon permeability of the substrate and surface absorptivity.

Additional Information:

• Production Capacity: 100
• Packaging Details: can

Product Details:

Seal "N" Flex 1 is a low modulus, one component, Class A polyurethane sealant. When cured it will forma tough, flexible seal capable of cyclic expansion and compression movement of 50%(+ 25%) of the original joint width.

RECOMMENDED USES
•Insitu concrete & render •Precast and tilt up panels •Brick & block work •Plasterboard face and paper lined recessed edges •FIbre cement sheet •Aluminium windows •Granite, sandstone and marble •GRC, Fibreglass & most other specialty panel systems
Bostik 720 Gm

Product Details:

We are engaged in offering xxxxxxxxx to our clients. Our range of all products is widely appreciated by our clients.

Product Details:

• Dowsil silicon for doors and windows. 
• industrial grade. imterior & exterior
• Neutral cure
• weather proof

Product Details:

In-situ on site membrane with high strength and elasticity.
Best in class elasticity and crack bridging ability.

• Stretchable membrane for leakage proofing of concrete surfaces
• Excellent UV stability
• High bonding strength
• Water-resistant
• Up to 600% elongation

All cracks narrow down from the millimeter range to end at the nano meter range. It is important to waterproof these at a nano level. Sealing & crack filling with flexible and non-shrinking sealant chemicals followed with a stretchable membrane on top will offer a complete solution for leakage proofing.

Elastobar – Stretchable Membrane for Waterproofing

• Mix 1 part Elastobar, 1 part cement and 1 part fine sand
• Stir well to get a uniform paste
• Slowly add water to get brushable consistency
• Apply 2-3 coats with a brush
• After the last coat, spray very fine sand on the layer and allow it to dry completely

Coverage:

• Membrane coating : 2 m² / kg of Elastobar (2 coats)

Product Details:

Polystyrene safe
- Bonds to most surfaces*
- High modulus
- Easy gunning Fast curing
- Interior/Exterior
- Bonds immediately on contact
- Adds rigidity and stiffness to help eliminate movement

General purpose construction- As a contact adhesive for the installation of wall and floor panels- Metal, timber & other sheets of plan materials to concrete, plaster or other rigid surfaces- Most bonding applications where high strength, gap filling one component adhesive is required- Timber, metal, cementitious and plaster sheets to timber or metal studs- Installation of battens or other fixings to brick, masonry or concrete walls- Suitable to use on foamed polystyrene

APPLICATIONSBostik N310 NO MORE NAILS CLASSIC can be applied either as a two-way stick or a one-way wet stick adhesive.

Additional Information:

• Item Code: N310
• Production Capacity: 100
• Delivery Time: 1
• Packaging Details: 320 GMS TUBE

Product Details:

Polymer based adhesive for fixing ceramic tiles and small format natural stone on dry areas of interior floor & interior wall up to a height of 3 Mtrs.

• Single component, just add water
• Interior applications, polymer based
• Economical & Easy to use
• Bonds to various substrates
• Exceeds ANSI A118.1T shear bond strength requirements
• Complies with EN / ISO with a C1T classification.
• Exceeds IS 15477:2019 – Type 1T Adhesive standards.
• Can be fortified with latex admix for external Tile and Stone installations.  

substrates

• Concrete • Concrete Masonry • Cement Mortar Beds • Cement Plaster • Ceramic Tile* • Brick Masonry • Cement Terrazzo • Existing Natural Stone* * Surface to be cleaned and roughened before installation of tiles or stones. 

Additional Information:

• Production Capacity: 200
• Packaging Details: 30 kg bag